I've managed facility procurement for a 400-person company for five years. Elevators, doors, garage openers, paint—if it keeps the building running, I've signed a contract for it. And I've learned one expensive lesson: the lowest quote is almost never the lowest total cost.
A $500 "savings" on an elevator service contract cost us $1,800 in downtime. An $800 dutch door installation turned into a $1,350 mess. And the less said about the garage door opener fiasco, the better.
Now I calculate TCO—total cost of ownership—before I compare any two quotes. That means adding up:
If the cheapest quote doesn't win on TCO, it doesn't win. That's the whole system. Keep reading if you want the stories behind it.
I'm an office administrator for a 400-person company across three locations. I took over facility procurement in 2020—right when everyone was trying to figure out hybrid work and building maintenance budgets at the same time. Roughly $350,000 passes through my purchase orders annually, spread across about a dozen vendors.
I report to operations and finance. Operations wants things fixed yesterday. Finance wants receipts and justifications. I've learned to translate "the elevator's making a weird noise again" into a TCO analysis that finance will approve without a meeting.
I didn't start out thinking this way. For my first year, I was the person who picked the cheapest quote every time and felt proud of the "savings." I want to say I figured it out on my own—but honestly, it took a few expensive mistakes to change my approach.
We have a Montgomery KONE elevator in our main building. For those who don't know the history: Montgomery Elevator was acquired by KONE back in 1994, and for years the Montgomery KONE name appeared on equipment and service records. By the time I took over procurement, the elevator was over 20 years old but still running—mostly.
Our maintenance contract was up for renewal. KONE's renewal quote was $2,200 a year. A local provider offered the same scope for $1,700. I calculated the risk: $500 in annual savings vs. the possibility of extended downtime. I told myself the elevator was old but stable. The math seemed obvious. I picked the local provider.
Three months in, the elevator started making a grinding noise. The local technician spent two hours looking at it and left without a fix. He said they'd need to order parts. Two weeks passed. No parts, no elevator. Our third-floor tenants—a law firm paying $18,000 a month in rent—started calling me daily. One email asked if we were "experiencing financial difficulties."
Turns out, the local provider had to order the parts through KONE's supply chain anyway—nobody else stocks legacy Montgomery KONE components. When the parts finally arrived, the technician spent another three hours guessing at the installation procedure.
In desperation, I searched KONE's documentation portal myself and found a KONE crane manual PDF—the procedure for safely lifting the elevator car during maintenance. Buried in the same document was a service bulletin describing exactly the noise we were hearing. The technician followed it and had the elevator running in 30 minutes.
Total downtime: 11 days. Total extra cost: $1,800 in emergency call fees and a rent credit I had to authorize. The "savings"? $500 a year.
ASME A17.1 sets the baseline for elevator safety and maintenance. But manufacturer-specific procedures—the kind you'd find in a KONE service bulletin—go beyond that baseline. A provider without access to the OEM's documentation is working from general knowledge, not the specific requirements for your equipment.
I now require proof of OEM documentation and parts access before I sign any maintenance contract. That's not something I would have thought to check before this happened.
We renovated our reception area in 2022. The design included a dutch door—the kind that splits horizontally so the top half opens while the bottom stays closed. Our regular contractor quoted $1,100. A company that mostly did residential work quoted $800.
You can probably guess where this is going.
The $800 vendor showed up and discovered our existing door frame wasn't square. "That'll be an extra $400 to modify." Plus a $150 "rush fee" because they'd only booked a half-day for the job. Final cost: $1,350.
The $1,100 vendor's quote had included frame modification—I just hadn't noticed because I was comparing bottom-line numbers instead of scope documents. I now require itemized quotes. If a vendor can't or won't break it down, I don't sign.
Our parking garage has a commercial Genie garage door opener. It died in 2023. I got two quotes: $1,200 from a Genie-certified installer, and $600 from a general handyman service.
The handyman installed a replacement unit using third-party parts. It worked fine for six months. Then it failed again—this time with a burnt-out motor. When I called the handyman, he informed me the work wasn't under warranty because he'd used aftermarket parts. The Genie logo on the opener didn't mean anything because the internals weren't genuine.
I ended up paying the certified installer $850 to redo the job with genuine Genie parts. Total: $1,450. More than the original quote from the certified installer.
Now I check two things before I check price: warranty terms and parts sourcing. If the warranty doesn't cover the work, I'm not interested.
This one's almost embarrassing. We needed to repaint our main hallway in the custom brown that matches our branding. A professional paint job would've cost about $800. I figured our maintenance team could handle it if we just matched the color.
I searched "how to make brown paint" and found a hundred tutorials. Looked straightforward enough. Our team mixed a few test batches. They matched the original paint in the can perfectly under fluorescent light.
On the wall, under natural light, it looked completely different. Brown is apparently one of those colors that shifts dramatically depending on lighting and surface texture. We ended up repainting the entire hallway—$600 for professional color matching and repainting, plus $150 in supplies for the failed attempt.
Some things you just pay an expert for. Custom color matching is one of them. It's not about whether you can technically do it yourself—it's about whether you'll get it right on the first try.
I'm not suggesting you run a TCO model for every decision. That would be its own form of waste. Here's when I skip it:
TCO is a tool for decisions that are hard to reverse—long-term contracts, equipment purchases, anything with warranty or downtime implications. For everything else, judgment and relationships work fine.
The one question I always ask now: "What's not included in this quote?" The answer tells me more than the bottom line ever will.